Published at Tuesday, September 04th 2018, 09:43:57 AM by Hector Bethune. Tableware. There are many materials that disposables come in today, each of which has its own particular use and benefits. Commonly, aluminium, foam and paper are used, but this range has been significantly extended over the years to now include environmentally friendly packaging and PET formed products, which are ideal for when a little more style and presentation is required.
Published at Thursday, October 25th 2018, 00:15:38 AM. Cutlery & Kitchen Knives By Mathieu Auger. A kitchen knife blade has four primary parts. The cutting edge or side that cuts is the most important. It is the business or working section of the knife. It needs to be sharp and its surfaces must be smooth. Many times the blade forms a point or tip at the end. For example, a chef knife usually has such a tip.The side opposite to the cutting side is smooth. This is the spine. of the knife. The heel of the blade is the opposite end from the tip and evolves into the tang. The blade continuation that is between the two parts of the knife handle starts st the heel and is called the tang. To put it another way, the tang is the extension of the knife blade that goes between the handle pieces. When choosing a heavy duty work knife, it is best to select one with a tang that is as wide as the knife blade and extends to the end of the handle.
Published at Thursday, October 25th 2018, 00:15:34 AM. Cutlery & Kitchen Knives By Fabien Masse. High Carbon Stainless Steel knives are ones that have between 0.1% and 1.0% Carbon as well as the needed amount of Chromium. They can be hardened through heat treating and will hold a good edge, requiring knife sharpening much less often. Typically these steels will also contain a combination of Molybdenum and Vanadium. Molybdenum is an element that increases a knife's toughness while Vanadium helps maintain a sharp knife edge for a longer period of time. High Carbon Stainless kitchen knives tend to have thicker blades and be less flexible. These kitchen knives tend to be more expensive as high carbon stainless is more costly to use. Instead of buying an entire knife set buying kitchen knives individually can allow a person to acquire better knives over time. Some examples of High Carbon Stainless Steels are 440-C, ATS-34, VG10, and S30V.
Published at Thursday, October 25th 2018, 00:15:22 AM. Cutlery & Kitchen Knives By Mathieu Auger. Among the vast range of cutlery items available, knives have a prominent position. As they come into frequent use in the kitchen, it is essential that you have good cutting knives. The best kitchen knives are found in makes of stainless steel, ceramic, carbon steel and more. Among them, plastic knives are the most preferred ones in food service stations, as they make the cutting and slicing process simpler, and reduce the risk of accidents. Knives are presently available in a variety of names including butter knife, bread knife, chef's knife, utility knife and more, according to the purpose for which they are used.
Published at Thursday, October 25th 2018, 00:15:14 AM. Cutlery & Kitchen Knives By Hector Bethune. Kyocera knives were launched in Japan in 1984. Despite their highly technical production, Kyocera believe nothing can replace skilled craftsmanship and many years experience, therefore all Kyocera ceramic knives are individually ground by hand.
Published at Thursday, October 25th 2018, 00:15:08 AM. Cutlery & Kitchen Knives By Nathan Tremblay. Generally steel is considered stainless if it contains at least 12% Chromium. The amount of Chromium is a debatable point some say 10.5% is enough for a steel to be stainless but when looking at most better quality stainless steels 12% - 14% seems to be the norm. That said Chromium is not the only element crucial to here. The quality of a kitchen knife varies considerably with the type of steel that the knife is made from. Many knives that are simply called stainless contain virtually no Carbon. Carbon is the element that allows steel to be hardened, hard steel will hold an edge better than soft steel thus providing better edge holding. Low Carbon Stainless typically has less than 0.03% Carbon, these tends to be used on inexpensive kitchen knives and other kitchen cutlery. They do not hold a very good edge and require frequent sharpening. Some telltale signs are highly shinny blades, often they are very thin and flexible knives, and commonly have serrated blades such as those seen on a bread knife.
Published at Thursday, October 25th 2018, 00:15:02 AM. Cutlery & Kitchen Knives By Nathan Tremblay. We did buy this knife just to see if what the man had said was true. He did not exaggerate. We were hooked. Being lightweight is one thing but the balance of this knife was superb. The design is sleek and modern in appearance but filled with the Japanese tradition of making some of the world's best cutting steel.
Published at Thursday, October 25th 2018, 00:10:24 AM. Cutlery & Kitchen Knives By Nicolas Gallois. Anolon knives are crafted of ice-hardened German steel. This high-carbon steel is extremely tough and holds its edge well. They will need to be sharpened occasionally, but not as often as some similar knife sets, which need to be sharpened after every use. Anolon knives can be used multiple times before they need to be sharpened, and they sharpen easily. The blades are stain resistant and aren't prone to rust, but as with all knives, you have to make sure they stay clean and dry. They can be washed in the dishwasher, but it's recommended that you hand-wash and dry them so they will last longer.