By B15MiLl4hcodingcolor. Cutlery and Kitchen Knives. At Saturday, October 27th 2018, 01:35:51 AM.
Generally steel is considered stainless if it contains at least 12% Chromium. The amount of Chromium is a debatable point some say 10.5% is enough for a steel to be stainless but when looking at most better quality stainless steels 12% - 14% seems to be the norm. That said Chromium is not the only element crucial to here. The quality of a kitchen knife varies considerably with the type of steel that the knife is made from. Many knives that are simply called stainless contain virtually no Carbon. Carbon is the element that allows steel to be hardened, hard steel will hold an edge better than soft steel thus providing better edge holding. Low Carbon Stainless typically has less than 0.03% Carbon, these tends to be used on inexpensive kitchen knives and other kitchen cutlery. They do not hold a very good edge and require frequent sharpening. Some telltale signs are highly shinny blades, often they are very thin and flexible knives, and commonly have serrated blades such as those seen on a bread knife.
Today hotels, restaurants and other food service stations treasure a vast collection of kitchen knives and cutlery for daily use. When buying kitchen knives and other cutlery for your regular use in the kitchen, it is important to get quality products. Today's best selling models are from the manufacturers, Georgia Pacific Dixie, Generations, Maryland Plastics, Boardwalk cutlery and Comet Waddington. You can buy their products at economical rates from wholesale dealers.
A good knife handle must be light, strong and be comfortable for the user to hold. These features provide a safe and efficient knife handle. The handle has two vertical pieces that cover the extension of the blade of the knife. (the part of the knife between the handle pieces is also called the tang....see below) Each of the two handle pieces has the same horizontal diameter. They cover the extension from the knife blade, which extends partially or completely the length of the handle. A quality kitchen knife tang runs the entire width and length of the handle and can be seen between the handle parts. Rivets hold the blade extension and the handle parts together.