By B15MiLl4hcodingcolor. Cutlery and Kitchen Knives. At Friday, October 26th 2018, 00:47:44 AM.
Knives used for softer foods do not necessarily need a full width and length tang. High carbon stainless steel is the top choice material for use in making cutlery knife blades. This top grade material keeps its color and is not damaged by acid foods like onions, lemons or tomatoes. Although it is much harder to craft a good cutting edge initially, it lasts much longer on a high carbon stainless steel blade. Materials that have less carbon content, like carbon steel and stainless steel, are also used for good kitchen knives. However, those knives do not last as well as those of high carbon stainless steel.
An in-drawer knife block is another option for storing knives in a drawer. Part drawer organizer and part knife block, drawer knife blocks are fitted with slots to hold knives of varying sizes and lie flat in a drawer. They provide protection and a way to store your knives out of site. The downsides are that they are not a very efficient use of drawer space and may not accommodate all of your knives. If you do not own a lot of knives and drawer space is not an issue, an in drawer knife block may be adequate.
A kitchen knife blade has four primary parts. The cutting edge or side that cuts is the most important. It is the business or working section of the knife. It needs to be sharp and its surfaces must be smooth. Many times the blade forms a point or tip at the end. For example, a chef knife usually has such a tip.The side opposite to the cutting side is smooth. This is the spine. of the knife. The heel of the blade is the opposite end from the tip and evolves into the tang. The blade continuation that is between the two parts of the knife handle starts st the heel and is called the tang. To put it another way, the tang is the extension of the knife blade that goes between the handle pieces. When choosing a heavy duty work knife, it is best to select one with a tang that is as wide as the knife blade and extends to the end of the handle.